Topic “Electronics”

Syndicate content

Electrical/Electronic Engineering

Course Overview

Type of Course and Awarding Body 

BTEC Extended Diploma

Level 

Level Three

What's it all about? 

This course is an extension of the Subsidiary Diploma in Engineering which is a prerequisite for entry, and aims to improve your suitability for the world of work, particularly in electronics. It contains a further 12 modules, including communications and project for engineering technicians. It then goes on to provide you with skills in further maths that will be used to help your understanding of the remaining modules and also provides an excellent introduction for further study at higher education level.

Progression 

The course will qualify you to an equivalent of three GCSE A levels (one transfered from the subsidiary diploma). The grade awarded - pass, merit or distinction - will be obtained by your performance across the modules and result in up to 420 UCAS points. This will provide you with a skill set that would enable you to be employed in a company as a trainee technician, or you may be accepted onto an Apprenticeship.

The UCAS points gained will enable you to apply for higher education level courses in similar subjects here or at any university.

Entry Requirements 

In our experience in order to be successful on this level of programme you will need one of the following:

  • four GCSEs at Grades A*-C (to include English and maths preferably at the higher tier)
  • an intermediate GNVQ in a related subject
  • a BTEC level 2 diploma in a related subject
  • an NVQ level 2/technical certificate in a related subject
  • successful completion of an Apprenticeship programme
  • equivalent qualifications or relevant work experience.

Duration 

One term from April to July, then one year from September to July to run consecutively

Run On Demand? 

No

Roll On Roll Off? 

No

Are there any exams? 

Individual in-class tests/exams may be required in some modules.

Course Content

What does the course involve? 

Units carried forward from the subsidiary diploma include:

  • health and safety
  • electrical principles
  • maths for engineers
  • principles and applications of electonic devices
  • measurement and test
  • features and applications of electrical machines.

Extended units to be studied include:

  • communications for engineers
  • engineering project
  • further electrical principles
  • further maths for engineers
  • selecting and using PLCs
  • electrical technology
  • principles and applications of analogue electronics
  • construction and applications of digital systems
  • three phase motors and drives
  • electronic circuit design and manufacture
  • microprocessor systems and applications.

When can I study? 

Four days per week

Electronics for Beginners

Course Overview

Type of Course and Awarding Body 

College Certificate

Level 

Level Two

What's it all about? 

This course is for those who have an interest in electronics and would like to get a more structured view of the subject.

It will start with basics of voltage, current and resistance and go on to explain AC and DC fundamentals. Components such as capacitors and inductors will be explained and supported with practical work where necessary. The effects of these basic components when used on AC and DC will be explained and demonstrated. You will get the chance to use the basics of an industry-standard piece of software to simulate and test the circuits discussed. Basics of Amplifiers will be covered using Integrated Circuits, with a chance to have a go at a design and build.

Progression 

On completeion of this course you will have the skills and knowledge to progress to larger electronics projects of your own, or you may like to progress to a higher electronics-based course.

Entry Requirements 

The only requirement is a fundamental interest in the subject and the ability to do some very basic maths.

Duration 

Ten weeks

Run On Demand? 

Yes

Roll On Roll Off? 

No

Are there any exams? 

There are no exams

Course Content

What does the course involve? 

The course will cover the following subject areas:

  • current voltage and resistance - Ohm's law
  • DC theory - series parallel circuits
  • AC theory - waveforms and circuits
  • capacitance
  • inductance
  • multism software simulator
  • amplifiers: integrated circuits
  • designing with the operational amplifier
  • simulate the design - build 1
  • build 2 - test the circuit

 

When can I study? 

6.00pm - 8.00pm one evening a week

Practical Electronics

Course Overview

Type of Course and Awarding Body 

College Certificate

Level 

Level Two

What's it all about? 

This course is set up for those who are interested in building electronic projects and who lack the skills or tools to do so. Ideally you will have something that you want to assemble or test, and make a finalised project that you can take away in full working order. There is a limit to what can be done in a 10 week course, but this can also provide you with good practical advice and skills that would enable you to complete a more complex project either at home or by continuing onto the Electronic CAD Basics and PCB Design and Production courses being run later in the year.

Progression 

Electronic CAD Basics (EMECB) leading to Prototype PCB Design and Production (EMPCB)

Entry Requirements 

You will need a familiarity with electronic components, circuit diagrams and terminology associated with the subject, as well as some basic electronic theory.

Duration 

10 weeks

Run On Demand? 

Yes

Roll On Roll Off? 

No

Are there any exams? 

There are no exams

Course Content

What does the course involve? 

If you have your own project that can be completed during the 10 week period, the material covered will be guided by you, otherwise we will be covering:

  • basic soldering skills with wires, cables and plugs,
  • PCB assembly
  • cable looming
  • methods of getting a professional looking project on completion.

When can I study? 

6pm-8pm one evening a week

Electrical and Electronic Engineering

Course Overview

Type of Course and Awarding Body 

Higher National Certificate (awarded by Plymouth University)

Level 

Level Four

What's it all about? 

This course is especially suitable for those in full-time employment in the electrical and electronic engineering industry, and is designed to provide you with the sound principles required of electrical and electronic engineering.We will take your natural talents in creative thinking, design and technical know-how and put them to work on a range of projects. As an engineer you will work at the cutting-edge of technology, transforming today's ideas into tomorrow's reality.

Progression 

This qualification gives you the opportunity to progress to:

  • the Electrical and Electronic Engineering Foundation Degree at the College, with one year's further study
  • a career within the electrical and electronic industry.

 

Entry Requirements 

Dependent upon the course, we welcome applications from people who have:

  • 60-120 UCAS tariff points
  • a BTEC national award in a related subject
  • a 14-19 advanced diploma
  • an advanced Apprenticeship
  • an NVQ level 3 in a related subject
  • equivalent qualifications or relevant work experience.

Duration 

Two years

Business Benefits 

Students can progress to a wide range of electronic engineering occupations.

Are there any exams? 

Modules are assessed by a mixture of coursework, in-class tests and examinations.

Course Content

What does the course involve? 

The following modules are studied:

  • digital and analogue devices and circuits
  • electrical and electronic principles
  • science and measurement
  • sustainability and energy business management
  • analytical methods
  • electrical power
  • microprocessor systems and high level programming
  • application of power electronics

Within the second year, students can choose to complete either an electrical pathway or an electronic pathway. The modules for each pathway are as follows:

  • applications of power electronics (electrical pathway)
  • electrical power (electrical pathway)
  • further analogue electronics (electronic pathway)
  • further digital electronics (electronic pathway).

When can I study? 

Usually Thursdays (first year) and Mondays (second year), 9.00am - 7.30pm

Electrical and Electronic Engineering

Course Overview

Type of Course and Awarding Body 

Foundation Degree, FdSc (awarded by Plymouth University)

Level 

Level Five

UCAS Code 

H602

What's it all about? 

This course is especially suitable for those in full-time employment in the electrical and electronic engineering industry, and is designed to provide you with the sound principles required of electrical and electronic engineering.  We will take your natural talents in creative thinking, design and technical know-how and put them to work on a range of projects. As an engineer you will work at the cutting-edge of technology, transforming today's ideas into tomorrow's reality.

Progression 

On successful completion you may progress to:

  • the final year of the BSc (Hons) Electrical and Electronic Engineering degree or the BSc (Hons) Electronic Communications Engineering degree at Plymouth University
  • enter into employment as an electrical or electronic engineer.

Entry Requirements 

Dependent upon the course, we welcome applications from those who have:

  • 120 UCAS tariff points
  • a BTEC national award in a related subject
  • a 14-19 advanced diploma
  • an advanced Apprenticeship
  • an NVQ level 3 in a related subject
  • equivalent qualifications or relevant work experience.

Duration 

Two years (full-time) and three years (part-time)

Business Benefits 

Educate electrical/electronic engineering students to be competent engineers, promote an active interest in electrical/electronic engineering and encourage students to respond to changes and developments within their profession.  It will also provide knowledge and understanding of current theories and developments in electrical/electronic engineering.

Are there any exams? 

Modules are assessed by a mixture of coursework, in-class tests and examinations.

Course Content

What does the course involve? 

The course includes the following modules:

  • digital and analogue devices and circuits
  • electrical and electronic principles
  • science and measurement
  • microprocessor systems and high level programming
  • sustainability and business management
  • analytical methods
  • further analogue and digital electronics
  • applications of power electronics
  • electrical power
  • control systems
  • work-based learning.

When can I study? 

Various days and times

Electrical Engineering and Renewable Energy

Course Overview

Type of Course and Awarding Body 

Foundation Degree, FdSc (awarded by Plymouth University)

Level 

Level Five

UCAS Code 

HH62

What's it all about? 

The demand for electrical engineers with specialist knowledge in renewable energy outstrips supply. Our foundation degree is very practical and is taught within a workshop environment. You will walk away with a comprehensive array of expertise where you will be able to tackle a career in this exciting and emerging industry. Graduates would ultimately expect to become leaders in this rapidly developing field.

Progression 

On successful completion you may be eligible to progress to:

  • the second year of the BSc (Hons) Electrical and Electronic Engineering degree at Plymouth University
  • the distance learning course, PgDip/MSc in Architecture: Advanced Environmental and Energy Studies at the University of East London
  • follow a career in the industry.

Entry Requirements 

We welcome applications from those who have a mimimum of four GCSEs at grade C or above including maths and science, and one or more of the following:

  • 120 UCAS tariff points
  • a BTEC national award in a related subject
  • a 14-19 advanced diploma
  • an advanced Apprenticeship
  • an NVQ level 3 in a related subject
  • equivalent qualifications or relevant work experience.

Duration 

Two years

Are there any exams? 

Modules are assessed by a mixture of coursework, in-class tests and examinations.

Course Content

What does the course involve? 

The course includes the following modules:

  • electrical installation engineering
  • electrical design and standby power systems
  • electrical power engineering
  • a choice of power electronics or control systems
  • renewable energy principles/systems
  • sustainability and energy business management.

When can I study? 

Various days and times

Engineering (Electronics)

Course Overview

Type of Course and Awarding Body 

BTEC Subsidiary/Extended Diploma

Level 

Level Three

What's it all about? 

This course aims to prepare you for the world of work, particularly in electronics. The subsidiary diploma is a six module course containing core modules on basic engineering safety and electrical/electronic principles. It then goes on to provide you with skills in maths that will be used to help your understanding of electronic devices, measurement and test principles, and provides an insight into basic electrical machines.

Progression 

On successful completion you may progress to:

  • an engineering-based foundation degree at the College
  • an Apprenticeship
  • a wide range of careers in the engineering industry.

 

Entry Requirements 

In our experience in order to be successful on this level of programme you will need one of the following:

  • four GCSEs at Grades A*-C (to include English and maths preferably at the higher tier and a grade C in science, or a level 2 diploma at merit grade)
  • an intermediate GNVQ in a related subject
  • a BTEC level 2 diploma in a related subject
  • an NVQ level 2/technical certificate in a related subject
  • successful completion of an Apprenticeship programme
  • equivalent qualifications or relevant work experience.

 

Duration 

Two terms (September to April)

Business Benefits 

This course gives students specialist skills within the electrical/electronics industries.

Run On Demand? 

No

Roll On Roll Off? 

No

Are there any exams? 

Individual in-class tests/exams may be required in some modules. There are exams in functional skills.

Course Content

What does the course involve? 

The subsidiary diploma includes:

  • health and safety in the engineering workplace
  • electrical principles
  • maths for engineering technicians
  • principles and applications of electronic devices
  • measurement and test
  • features and applications of electrical machines.

There is also a requirement to complete functional skills and an IT support unit.

For those continuing onto the extended diploma, another 12 units are studied including further maths and project modules.

When can I study? 

Four days per week

Engineering (Electronics)

Course Overview

Type of Course and Awarding Body 

BTEC Diploma

Level 

Level Two

What's it all about? 

This course aims to prepare you for the world of work, particularly in electronics. It contains core modules on basic engineering skills and then goes on to discuss the methods used in circuit construction. In order to do this you will learn about electronic devices and their operation in mobile and other electonic systems. It will also give you an insight into the operation and maintenance of electronic systems.

Progression 

On successful completion you may progress to:

  • an appropriate level 3 course offered at the College
  • an Apprenticeship
  • enter directly into employment.

Entry Requirements 

In our experience in order to be successful on this level of programme you will need one of the following:

  • four GCSEs at grades D-F (including grade Ds in English, maths and science, or a level 1 diploma at merit grade)
  • a BTEC foundation diploma in a related subject
  • an NVQ level 1/technical certificate in a related subject
  • equivalent qualifications or relevant work experience.

Duration 

One year

Run On Demand? 

No

Roll On Roll Off? 

No

Are there any exams? 

Individual in-class tests/exams may be required in some modules. There are exams in functional skills.

Course Content

What does the course involve? 

The course includes the following modules:

  • working safely in the engineering workplace
  • interpreting and using engineering information
  • maths for engineering technicians
  • applied electronical and mechanical science for engineering
  • engineering assembly methods and technology
  • electronic circuit construction
  • mobile communications technology
  • electronic devices and components
  • operation and maintenance of electrical systems.

There is also a requirement to complete functional skills, progression awards, and an information communication technology system support unit.

When can I study? 

Four days per week

Engineering (Electrical/Electronic)

Course Overview

Type of Course and Awarding Body 

BTEC/EDEXCEL Diploma

Level 

Level Three

What's it all about? 

Electrical, electronic and computer systems form the basis of almost any device you can imagine. On our course you will continue to build up your bank of skills, knowledge and expertise to make a valuable contribution to creating and implementing the technology behind these products. You will be using industry standard software to design simulate and manufacture examples of this technology and become adept at working in the electronic and electrical business environment but also be fully aware of the health and safety aspects that affect your work.

Progression 

Successful completion of this course provides entry level qualifications for the HNC / foundation degree programmes at the College.

Progression to outside institutions may depend on the UCAS points gained from the qualification.

Entry Requirements 

In our experience in order to be successful on this level of programme you will need one of the following:

  • four to five* GCSEs at grades A*-C (including English, maths and science)
  • an intermediate GNVQ in a related subject
  • a BTEC first diploma in a related subject
  • an NVQ level 2 / technical certificate in a related subject
  • successful completion of an apprenticeship programme
  • successful completion of the Gateway / Newstart programme
  • equivalent qualifications or relevant work experience.

* A level candidates will be expected to have five GCSEs

Duration 

Two years

Business Benefits 

Gives students specialist skills within the electrical / electronic industry.

Are there any exams? 

During the first year the majority of assessments will be a mix of in-class practical and time constrained tests. The second year will be more coursework based. All will involve exam type assessments and written assignments.

Course Content

What does the course involve? 

In the first year you will study the following units:

  • maths for technicians
  • electrical / electronic principles
  • further electrical / electronic principles
  • applications of electronic devices
  • communications for technicians
  • applications of electrical machines

In year two you will study the following units:

  • communications for engineers
  • engineering project (double unit)
  • electronic measurement and test
  • further maths
  • three phase motors and drives.

When can I study? 

Wednesdays or Thursdays, 9.00am - 8.15pm. One day per week.

College Celebrates Students’ Success

Staff and students at City College Plymouth are celebrating today after the City’s league tables showed that the College was ranked fourth* out of the fifteen non-selective schools and colleges in the City. The College’s average points score per exam entry is 208.7.

right content